Lumiflon - The Higher Standard

Product Specifications

LUMIFLON^® LF-710F was developed specifically for use in powder coatings. Its high Tg means that it blends easily with other components of powder coating formulations, including pigments, isocyanates, and additives. Powder coatings made with LF-710F offer the same outstanding weatherability as LUMIFLON^® liquid coatings.

Application Areas

Architecture
Coil coating
Curtain wall coatings

Application Examples of LUMIFLON^® LF-710F

Name:	Puri Bank
Where:	Jakarta , Indonesia
When:	Dec. 1994
Substrate:	Aluminum

Name:	Bennelong Apartments
Where:	Sydney , Australia
When:	Dec.1999
Substrate:	Aluminum
*These pictures were provided by ORICA POWDER COATINGS.

LUMIFLON^® Powder Grade

Grade	LF-710F
Resin properties
Tg (°C/F)	51.5 / 125
Softening point (°C/F)	90 / 194
OH Value (mg KOH/g-Polymer)	46
Acid Value (mg KOH/g-Polymer)	0
Varnish properties
N.V.(wt%)	100
Solvent	none

Features of LF-710F

LF-710F···	Is used to make ultra-weatherable fluorourethane powder coatings.
	Powder coating can be produced with conventional facilities.
	Powder coaing can attain gloss.from matte finishes to high gloss.
	Powder coating can attain various types of finishes from clear coats to varied colors.
	Powder coating system is cost competitive against PVdF system, without requiring the use of cryogenic grinding.

LF-710F Recommended Powder Processing Equipment

Process	Powder Equipment	Example
Mixing	Common mixer	Henschel, Mixaco
Extruding	All type of extruder	Single, Twin Screw & Planetary
Grinding	Various mills	ACM, Turbo, Jet
Classification	Common classifiers	Mesh,Air classifier

Typical Extrusion Conditions for LUMIFLON^® LF-710F Powder Coatings

Type	Twin screw (Thermo Prism 16mm)
Processing Temperature (°C/F)	120 / 248
Screw rotation (rpm)	250
Feed rate	25kg / hour

LF-710F Powder Application Method

Coating Equipment	Yes / No
Electrostatic gun	Yes
Fluidized dipping	Yes
Tribomatic gun	No

Click here to view LUMIFLON^® LF-710F Material Safety Data Sheet